6-017-3576175
27,Jalan 6/2,Taman Industries Selesa Jaya, Seri Kembangan, Selangor, Malaysia
VT300 Self Pump Powder Liquid Inline Homogenizer - is high-performance dispersing machine for the production of emulsions and suspensions in self pump complete circulation operations. Using the rotor-statorand vacuum self generation principle, it is best suited for applications that cannot be accomplished using conventional stirring methods. The machine is capable of processing highly abrasive products and media with a viscosity of up to 80.000 mPas.
It has strong powder function from the funnel and prevent the liquid and powder mix up before entering the dispersing chamber.
Features & Specification
Working flow rate (l/h) | 3,000 – 125,000
| Operating Environment | 0-175°C, 95% rel. humidity |
Motor Power(kW) | 5 -75 - 3 phase Normal or Ex-Proof | Protection class | IP55 |
Voltage/ Frequency | 380-450V / 50-60Hz | Certified standards | 89/336EEC,72/023/EEC, EMC acc. IEC/EN 61000-6-2 / 3, Safety acc. IEC/EN 61010-2-51 |
Working Temperature and Pressure Range | Up to 160° C 15 bar | Seal type | Lip Seal (150° C ) or Double Acting Mechanical Seal (160° C and 15 bar) |
Speed range (rpm) | 3,000 | Warranty | 2 years – spare part due to manufacturing defects |
Speed control type (optional) | 220V/50-60Hz frequency inverter control : 0-6000 rpm | Sterilization Method: | All |
Pumping system (optional) | centrifugal pump screw pump | pH Range: | 2-13 |
Standard Packing Size ( mm) | 700(L)x400(W)x600(H) ~1400(L)x750(W)x1350(H) | Suitable for solvents & abrasive substances:: | YES |
Weight (kg) | 65-750 | Ultimate Fineness, Suspensions&Emulsion: (µm) Max Viscosity | Suspension: 10-15 Emulsion : 1-5 80,00 |
-the inline strong powder suction into the liquid circulation loop through tank
- the equipment works in manner of quickly suct in carpopol powder from the funnel.while open tank.water for circulation
-VT300-03 Vertical Inline Homogenizer for.hydrophopic products
-VT30-10 Dyna Flyers for gel viscosity:50000cps suck into tank circulation with water
-VT300-10 Dyna Flyers for CMC powder suck into tank circulation water
VT300 Series | 305 | 310 | 325 | 330 | 350 | 375 |
Power (kw/hp) | 4 | 7.5 | 18.5 | 22 | 37 | 55 |
Speed (rpm) | 2880 | 2800 | 2880 | 1470 | 980 | 980 |
Medium Inlet Diameter A(mm) | 50 | 70 | 70 | 100 | 125 | 150 |
Medium Outlet Diameter B(mm) | 32 | 50 | 70 | 80 | 100 | 120 |
Flow rate-H2O (L/min) | 620 | 830 | 1080 | 1920 | 3050 | 5100 |
Weight (kg) | 70 | 170 | 350 | 440 | 630 | 860 |
Our electrical apply to international approval standard
Features and Benefits
• Dispersions of gums in seconds without “Fish Eyes”
• Achievement of fine emulsions of 1-5 microns within 10 minutes
• Elimination of aeration within 8-25 minutes
• Flexible mixing capacities from 10-2000 liters
• Safe Operation on floor level for operator
• Higher production batches compare to batch homogenizer
• Outstanding stability and homogeneity where the circulation continue till the satisfaction achieved
• Improvement of product qualityand save cost
• No clogging and balancing problem compare to "conventional inline powder inductions system"
• Faster rate of wetting process compare to high speed "rotor/stator disperser" which efficiency is limited by the flow
pattern and high viscosityof medium
• No air-entrainment problem compare to "high speed disperser"
How to quote you accurately without problem in future ?
Customer to fill in the form with respect model of chosen equipment accordingly.
Model: VT300 "Dyna-Flyers" Vertical Type Inline homgenizer/pump
Model: BT200 " Dyna-Stream" Batch Homogenizer
Molecular/Colloidal Dissolving
Below is a list of some typical dissolving applications, and which Dyna-Ken mixer provides the best solution for Dyes,Crystal powders,Salts,Sugar,Detergents,Binding agents,Hydrocolloids,Elastomers,Resins,Thixotropic agents
Powder-Liquid Incorporation
Incorporating powders into liquids offers many challenges to processors. The powders may be difficult to wet out, and may produce fish-eyes if not effectively dispersed into the liquid. The powders are often added to a vessel by dumping bags into the top, creating a plume of dust and creating a possible health hazard. Eductors, blenders, and other powder addition equipment will often clog, or not perform as well as desired, or the system is too complex to clean and maintain. dyna-Ken mixer provides the best solution for :Xanthan gum,Starches,Fumed silica,Milk solids,Carbopol,Carbomel,Sugar,Cellulose,Xanthan Gum,Pigments,Pectin,Clays
Suspending -Wet Milling (Solid-Liquid)
Suspending is dispersing of solid particles in a liquid. It is often desirable to reduce the particle size of the solids in conjunction with dispersing, and this is often referred to as wet milling. With the use of our mixer and sufficient energy input, the final product will become homogenized best solution for Carbon black,Titanium Dioxide,Seeds,Polishing agents,Clays,Graphite,Crystals,Catalytic agents,Sulfur,Slurries,metal Oxides
Emulsifying (Liquid-Liquid Systems)
Emulsifying is the process of dispersing one liquid in a second immiscible liquid, such as oil dispersed in water. A colloidal suspension is a system comprising particles dispersed in a liquid that do not settle out of solution due to their extremely small size of less than one micrometer for :Margarine,Ice cream,Proteins,Creams and Lotions,Salad dressings and sauces,Micro-encapsulations,Paraffin,Cosmetics,Mineral oils,Pesticides and herbicides,Waxes
